MTV-D-54G1H   22X Zoom Color IR Camera

    

　

Want to see vivid image and vibrant color both day and night under sunny or rainy day or even in a totally dark room with  less than 0.000000 Lux.

　

MODEL NO.

MTV-D-54G1H

TV SYSTEM

NTSC

PAL

IMAGE SENSOR

1/4-inch  CCD  Image  Sensor

CCD TOTAL PIXELS

811(H) X 508(V)

795(H) X 596(V)

SCANNING SYSTEM

525 lines, 60 fields/sec

625 lines, 50 fields/sec

SYNC SYSTEM

Internal / VD-Lock

MINIMUM

ILLUMINATION

Legacy mode

1.5  lux F1.2, 0 lux (IR ON)

Start light Mode

0.02 lux F1.2, 0 lux (IR ON)

RESOLUTION

480 TVL

WHITE BALANCE

Mode

ATW / AWC / FIX  ( Zero color rolling)

Range

3200 ~ 10000 ºK   ( 2200 ~ 15000 ºK with S Filter)

GAIN CONTROL

Mode

AGC (ON / OFF)

Range

0 ~ 18dB

S / N  RATIO 

52dB ( MIN) / 60dB ( TYP )  (AGC OFF)

ELECTRONIC SHUTTER

1/60~1/120,000 sec.

1/50~1/120,000 sec.

Lens Canon 22X optical zoom lens,F1.6-3.7,f=3.7-85.1mm
Motor-Zoom / Focus / Iris 500,000 times life
Zoom 220X (22X optical 10X digital), Focus: Auto/Manual, Position: 64 position

Control Interface

RS-232
B.L.C. Function Super BLC, 48 zone BLC
Control Function Dry Switch, RS-232C (Drive option), OSD control
Communication Baud Rate 9600 bps

MIRROR FUNCTION

SELECTABLE BY OSD MANUAL
Cross Line SELECTABLE BY OSD MANUAL
Freeze Function SELECTABLE BY OSD MANUAL
NEGATIVE IMAGE SELECTABLE BY OSD MANUAL

Storage Temp./Operation Temp.

-30℃ to 60℃/-20℃ to 50℃, Water Resistance: IP 55

VIDEO OUTPUT

Composite & Y/C output 1.0V p-p at 75 ohm

IR LED 45 unit Infrared LED, 6000hrs, View Angle: 70°Beam Spread: 30°

OPERATION TEMPERATURE

-20℃ TO 50℃

OPERATIONAL  HUMIDITY

within 85％ RH

Distance 15 Meter
Construction Aluminum, with off-white baked enamel finish
Dimensions/Weigh Ø105mmx250(L)mm / 1.2Kgs (2.64lb)

POWER  SUPPLY

DC 12V (+/-10%), IR DC 12V 660mA 

※Do not open the housing, otherwise waterproof function will not be guaranteed.

　

　

MTV-D-54K0   1/4" Day & Night Camera

D-54K0  is not a thermal image camera, it provides 100 times better image than thermal camera.    

D-54K0 is not an ordinary day and night camera, instead it is a  revolutionary camera incorporate with 7 new technology that is developed by Mintron optical research team.
D-54K0 have build in interactive infrared LED illuminator and  6 more leading edge technology to serve vivid image and vibrant color both day and night.

　

Mintron

Legacy camera provided  by others

D-54K0 Color camera with Night vision  

       B/W Night vision  

        Color       

       Day  & Night       

Day time image

Strength

Perfect color rendering during day time Clear B/W + Color image during night time with perfect focus and Still see neon sign in color

High quality B/w image and  good resolution

Vivid color during day time

See  color image  during day time.
and  B/W image night time.
low cost and easy to do

Night time image

Weakness

None!
Except little bit expensive.

Blurred image during night time, due to de-focusing on infrared.

See nothing during night time due to low sensitivity

See distorted green wish or pink wish color image  during day time. and
blurred B/W image during night time

　

1. interactive infrared LED illuminator:
10 high power high luminance wide angle LED with 880nm spectrum to optimize sensitivity and  allow user to see object  10 meter away during zero lux ( total darkness ) situation

2. A super quality tailor made 5 glasses Infrared lenses build by special glass material with 131 layer optical coating to provide perfect focus on both  white light and infrared. User will be very surprise to see clear crisp image during the night under aid of infrared . This kind of performance was impossible due to infrared and white light do have different focus point with the same lenses hence infrared image in all other  legacy camera always having  blurred and vague image due to de-focus as a nature rule of the physics. 

3. Solid state infrared optical switch:
During day time  IR cut filter is turn on to ensure all harmful infrared is stopped so as to provide excellent color rendering and vivid image, during the night infrared filter will turn off to allow infrared to pass through lenses and create perfect image on CCD sensor.

During night time  infrared LED lamp will gradually turn on  with proper amount of illumination that is required by circumstance, and the IR cut filter on the infrared spectrum is turned off to allow infrared on 880nm to start to reach CCD sensor. hence a perfect B/W image is created for night vision.

4. See color image under infrared illumination.
D-54k0 will allow user to identify color light spot such as red, green ,or blue LED indicator lamp on stereo equipment, a traffic light, or color of the neon sign during the night while infrared  lamp is the major illumination source. this effect  was impossible on legacy camera, because it can only display pure B/W image without any color due to color sub-carrier need to be forced off to improve S/N ratio. The reason why Mintron D-54K0 will let the color sub-carrier stay on was due to special color rendering circuit is  used as an in heritage of  proprietary Alpha  technology

5. Fog free cover glass.
Fog free cover glass is used to avoid fog to build on both inner and outer surface of the cover glass.

6. K series camera technology
K series camera is build from Mintron 3rd generation DSP M88128. It is famous to have:
1) 0.5 lux sensitivity ( 2~4 times better then others on 3 to 6 lux ).
2) 60dB S/n ratio typical 52 dB minimum.  (compare to 40~ 48 dB of others)
3) Mirror image (compare to others do not have)
4) 121 dB smear rejection ratio (compare to 90 to 110 dB of others)
5) 750mv dynamic range  (compare to 450 of others )
6) Optional auto iris feature on 70~150 IRE range 

Application
Office home security
Camping site surveillance
Wild creature watching
Military base watching
Bank, hotel surveillance
IC foundry monitoring